Blank
Back to Homepage

News
Products
Resellers
Back to Street cabinets
Download datasheet
Company Information and Contacts
Sitemap
 

100/200 Pair Lineside Box


Lineside box Many metal exterior cabinets can experience problems due to environmental changes in temperature and humidity, forming terminal destroying condensation inside.

This effect is often countered by deploying heaters, chillers and/or forced ventilation. Whilst this is sometimes cost effective on major distribution cabinets, it is not the case on smaller units.

The Austin Taylor Lineside Box is a compact enclosure designed to minimise the harmful effects of condensation and heat without the additional cost of providing such ‘Controlled Atmosphere’ environments. This is achieved by providing a weather sealed enclosure inside a strong well ventilated external enclosure. Achieving an IP rating of IP56 overall. Making it particularly suitable for exposed locations e.g. lineside distribution. The cabinet is available in two convenient sizes: 100 and 200 pair.

The main lift-off cover is secured by means of a slam-latched bolt and optional padlock, yet is easily removed to give excellent 180 degree access to the interior cabinet. Facilities are provided in this section for earthing and cable strain relief.

The interior cabinet is equipped with weather seals and in its turn secured using a simple coin operated quarter turn latch. Cable access is provided by means of three removable rubber cable entries that will accommodate cables up to 22mm diameter. The mounting frame supplied supports upto 23 strips terminating 237A or equivalent and is pre-fitted with five strips.


Dimensions and Capacities
Dimension 100 Pair
200 Pair
Height (total)
1000mm
1335mm
Height (installed)
600mm
930mm
Width
300mm
300mm
Depth
200mm
200mm
     
Terminal Capacity (type 237)
10
23

Materials
Base is 2mm ferritic stainless steel.
Cover is 1.5mm ferritic stainless steel.

Protection
IP56 in standard format.

Finish
Polyester powder coating. The gloss finish enables graffitti to be removed using mild solvents or mild abrasive compounds. Standard colour is green (RAL6009/6)

Installation

The cabinet may be placed directly in the ground with no special preperation, however it is recommended that the base be filled with washed pea gravel to a level slightly above ground level and an impervious 'weather board' be placed on top of this to minimise the effect of wet conditions.
The cabinet is not recommended for use in locations prone to flooding or marshes.


Ordering Information
Description Part No Pallet multiple
Lineside Box 100 Pair 9CAB220571 12
Lineside Box 200 Pair 9CAB203791 12

Accessories
Items you may wish to remember!
Name Description Part No
237A 10 pair IDC strip
with test and disconnect facilities
9CON000083
PM5B Protector mount 5B
Plugs into 237A & holds Arrestor 14A
9PRO000003
14A Arrestor 14A
3 pole surge arrestor
9ARR000003
237C 20 pair IDC strip
without test and disconnect facilities
9CON000085
51A Hinged label holder
Clips on top of 237 strip
9DES000513
53A Label holder for groups of 237 strips
Takes one backmount position
9DES000513
Label holder Write on label to fit standard backmount position
9LAB166961
Tool 2A Wire inserter tool
9TOO000020
IDC tool Disposable wire inserter
9TOO200671
EM1A Earthing strip to fit standard backmount position 9STR153992

Return to top of page


Copyright © 2002 Austin Taylor Communications

. . . . . . .